6
The following options may be displayed at start-up:
“Would you like to Perform End User Setup”
X
YES - Will prompt the selection of “Customer Specific”
settings.
Select the appropriate Customer
X
NO - Will allow the user to navigate the menus without
loading Customer settings
WARNING: If “NO” is selected, the display will prompt for
the END USER SETUP each time the unit is reset - until a
Customer is selected.
“Enter the Executive PIN”
X
This prompt indicates no setup information has been
entered.
All Setup (Policy) parameters, Currency and Dispense
selections and User information must be manually
programmed.
See Mandatory Programming on the following pages.
“Log In (Main Screen)”
X
The unit has been pre-programmed at the factory for
customer settings, the customer must provide the Log In
codes.
“Store Name/Number”
Tap the Touchscreen icon until the desired characters appear (4 to
16 characters) and press “DONE”.
NOTE:
To bypass the Store Number entry, select “GO BACK”.
Initial Startup