20
MEI Bill Acceptor Manual Cleaning
NOTE:
Manual cleaning should be performed every 30 days or when
a “Cleaning Reminder” is displayed.
A “cleaning reminder” will be displayed when manual cleaning is
required.
The cleaning reminder will continue to appear at regular intervals
until a “Clear All Odometers” is performed.
To reset the cleaning reminder:
Step 1:
Navigate to “CLEAR ALL ODOMETERS”.
Log In > More > Maintenance > Bill Acceptors >
Clean Acceptors > Clear All Odometers
WARNING:
Clearing the odometers does not perform any type of
cleaning function on the Bill Acceptors!
See the following pages for cleaning details
To perform Manual Cleaning:
Step 1:
Remove the Bill Acceptor from the Chassis.
Step 2: Open the “clamshells” on the Bill Acceptor by sliding the
yellow cover forward and separating the (2) halves.
Step 3:
Use compressed air to blow out the feed path and crevices
on the Bill Acceptor.
Step 4:
Clean the rubber rollers and sensor lenses using a clean
cloth dampened with ethyl or isopropyl alcohol.
Step 5:
Close the clamshell(s) securely.
Step 6: Clean the “Cassette Present” Sensors on the bottom of the
Bill Acceptor Head and top of the Cassette.
Step 7:
Replace the Bill Acceptor into the Chassis.