Synergy Controller Application Note 4
August 2010, Revision - C
Tidal Engineering Corporation © 2010
Page 10 of 18
A message box will then let you know if the import was successful or not.
Now that the file is imported, we can now use the barcode scanner.
Testing the Setup
Creating the Profiles
To create the profiles either enter the example profiles as shown below, or copy the
profiles provided with this application note to a disk and load them on the controller.
You can also create your own, just make sure they are called product1.vpl and
product2.vpl while using the example macro file shown above or provided with the
application note.
Example Profile “Product1.vpl”
