Page 13
Model: FCA 301 EC/NC (Master)
Operation
indicator
External
alarm
Outdoor ambient temperature sensor Chiller entering water temperature sensor Chiller leaving water temperature sensor Module entering water temperature sensor
Module leaving water temperature sensor
Circuit 2 condenser temperature sensor
Circuit 1 condenser temperature sensor
To next module
Remove ON/OFF
External interlock
Transformer
High pressure switch
Low pressure switch, cooling
Overload protection
Main switch
W
ater flow switch
Symbol
Description
Symbol
Description
Compressor
Fan motor
Power indicator
Contactor
Phase protector
Fuse
T
imer
Discharge temperature switch
Last module close
Jumper setting
FCA301EC FCA301NC
Overload protection setting
Timer setting
FCA301EC FCA301NC
8S
8S
DIP
switch setting
DIP
S2
FCA301EC FCA301NC
S2.5
S2.6
S2.7
S2.8
DIP
switch setting
DIP
S2
S2.5
S2.6
S2.7
S2.8
DIP
switch setting
DIP
S2
S2.5
S2.6
S2.7
S2.8
1. Field wiring; Factory wiring. 2. Communication bus (A&B) wire must > 0.25 mm
2
, A
& B must be same polarity
.
3. Communication bus must alway from power cable. 4. Unit address NO.1 (S1.1 - S1.4 OFF) is reserved for Master only
.
5. For individual control (single unit), jumper JP1 CLOSE. 6. For single unit, insert the
TH5 &
TH6 sensor
into water inlet and outlet of the heat exchanger
.
NOTE:
