Page 17
Model: FCA 301 EH/NH (Slave)
High pressure switch
Low pressure switch, cooling
Overload protection
Main switch
W
ater flow switch
Symbol
Description
Symbol
Description
Compressor
Fan motor
Power indicator
Contactor
Phase protector
Fuse
4 way valve
Crankcase heater
T
imer
Discharge temperature switch
Module entering water temperature sensor
Module leaving water temperature sensor
Circuit 2 condenser temperature sensor
Circuit 1 condenser temperature sensor
To next module
From previous
module
Operation
indicator
External
alarm
Last module close
Jumper setting
FCA301EH FCA301NH
Overload protection setting
Timer setting
FCA301EH FCA301NH
8S
8S
1. Field wiring; Factory wiring. 2. Communication bus (A&B) wire must > 0.25 mm
2
, A
& B must be same polarity
.
3. Communication bus must alway from power cable. 4. Unit address NO.1 (S1.1 - S1.4 OFF) is reserved for Master only
.
5. For individual control (single unit), jumper JP1 CLOSE. 6. 7. OUT6 is reserved for auxiliary heater
.
NOTE:
DIP
switch setting
DIP
S2
FCA301EH FCA301NH
S2.5
S2.6
S2.7
S2.8
DIP
switch setting
DIP
S2
S2.5
S2.6
S2.7
S2.8
DIP
switch setting
DIP
S2
S2.5
S2.6
S2.7
S2.8
