Tiara Yachts 53 COUPE Скачать руководство пользователя страница 34

Страница: 34 / 166

EQUIPMENT AND FEATURES

1-8

53 COUPE

RED LIGHTS

: Press to turn ON or OFF the red overhead lights, for use during

night navigation.

BLUE LIGHTS

: Press to turn ON or OFF the blue accent lights.

ACC

Press to operate optional accessory equipment, if installed.

1.2.7 Compass

The compass is located at the top of the helm and indicates the direction the bow

of your boat is headed. The compass should be compensated by an authorized

Tiara Yachts dealer, or other qualified marine service facility, for magnetic devia

tion associated with your particular location.

1.2.8 Blower & Bilge Pump Controls

The blower and bilge pump buttons are located outboard of the helm, forward of

the engine control head.

BLOWER

: Press the button ON to activate the engine room exhaust blowers.

The button will light up blue when the blower is ON.

BILGE (FWD, MID, AFT)

: Press the appropriate button to manually activate the

corresponding bilge pump. Bilge pumps are located (from forward to aft): under

the master stateroom floor hatch (FWD); forward in the engine room (MID); and

in the lazarette area (AFT). The bilge button will light up red if the bilge pump has

been automatically activated.

1.2.9 Seakeeper

Gyro Stabilization System (optional)

To operate the optional Seakeeper

Gyro Stabilization System, if installed, use

the control panel located on the helm. Refer to the Seakeeper user manual for

more information.

1.2.10 Spotlight Control Pad (optional)

Press the ON/OFF button to turn the optional spotlight ON or OFF, if installed.

Use the up, down, left and right arrows to control the orientation of the spotlight,

and the SPEED button to control rotation speed.

Содержание 53 COUPE







































































































































































Результаты поиска

Содержание 53 COUPE

Отзывы:

Похожие инструкции для 53 COUPE

Бренды по названию

Популярные бренды

Tiara Yachts 53 COUPE, Руководство пользователя

Результаты поиска

Содержание 53 COUPE

Отзывы:

Похожие инструкции для 53 COUPE

Бренды по названию

Популярные бренды