Tiara Yachts 53 COUPE Скачать руководство пользователя страница 118

Страница: 118 / 166

ROUTINE MAINTENANCE

7-10

53 COUPE

•

Do not use a pressure washer for the first 60 days following the boat’s manu

facture. Using high pressure while the paint is still fresh could affect the finish.

Also avoid high pressure too close to areas with visible chips or cracks.

•

Wash your boat often, especially when exposed to dusty, acidic or alkaline

environments.

•

When washing your boat, use non-abrasive, neutral pH (non acidic or alkaline)

detergent. Do not use solvent-based solutions for washing.

•

Do not wash the boat with extremely hot water or while the surface is hot.

•

Avoid washing with stiff bristles. Soft cloth and soft brushes are recommended.

•

Do not allow spilled gasoline, oil, anti-freeze, hydraulic fluid, or windshield

washer fluid to sit on the paint or gel coat; remove immediately by rinsing with

water. With some oils and hydraulic fluids, the allowable exposure time before

staining occurs is significantly shortened if the fluid or the painted surface is hot.

•

Have any paint chips, nicks or scratches repaired as soon as they occur to

protect against future degradation.

Should your boat’s finish become damaged, have it repaired as soon as pos

sible. Contact your Tiara Yachts dealer or a marine service facility and specify

the same Imron

polyurethane marine finish as used for the original finish.

7.4.3 Plexiglas

& Acrylic

The hatches and portlights in your boat are made of Plexiglas

and must be

cleaned with mild soap and water or Plexiglas

cleaner only.

CAUTION

Keep all strong solvents such as acetone, and window cleaners

containing ammonia (such as Windex

), away from Plexiglas

and

acrylic surfaces. They can cloud and cause crazing in the Plexiglas

and acrylic surfaces.

Содержание 53 COUPE







































































































































































Результаты поиска

Содержание 53 COUPE

Отзывы:

Tiara Yachts 53 COUPE, Руководство пользователя, Страница: 118 / 166

Результаты поиска

Содержание 53 COUPE

Отзывы: