Tiara Yachts 53 COUPE, Руководство пользователя, Страница: 117 / 166

ROUTINE MAINTENANCE
7-9 53 COUPE
Most of the shiny white surfaces on your Tiara are gel coated. The deck, hardtop
exterior and swim platform are a few examples. Depending on the build of your
boat, the hull sides may be gel coated with a painted boot line or entirely painted.
If you are unsure about your boat’s finishes, contact your Tiara Yachts dealer.
7.4.1 Gel Coat
Time and exposure to the sunlight may cause the gel-coated surfaces to fade,
dull, or chalk. Regular applications of a premium marine wax will minimize this. If
you find a noticeable chalking of the gel coat you may choose to have it buffed to
bring back the original luster. We recommend contacting your Tiara Yachts dealer
or other marine service facility if your finish needs attention.
CAUTION
!
Experience is required to buff your Tiara. Do not buff your boat
unless you have been properly trained and are using an industrial
strength buffer with the appropriate pads and polishing materials.
After buffing, apply a coat of premium marine wax to all smooth surfaces, follow -
ing the instructions included with the wax. Refer to gel coat care card that came
with your boat.
If the fiberglass or gel coated surface should need repair, contact your Tiara Yachts
dealer or another qualified marine service facility.
7.4.2 Imron
®
Marine Finish
Imron ® polyurethane marine finishes provide superior protection against the ele -
ments your boat will face throughout its long life. To ensure you maximize the
benefits of Imron
®
, use the following guide. If you are unsure about your boat’s
finishes, contact your Tiara Yachts dealer.
To maintain your painted hull finish:
• During the first 30 days following the boat’s manufacture, when the finish is
still fresh, clean the boat with a water rinse only.
• Do not wax for the first 60 days following the boat’s manufacture.