THUNDER LASER
MARS-120
www.thunderlaser.com
THUNDERLASER TECH CO., LTD
Tel :(86)755 82689501
7
1.4
Technical Data / Device Specification
Mechanics
Working area 47.2
“x 31.5“/ 1200 x 800 mm
Table Size 51.2
“x 36.6“/ 1300 x 930 mm
Z Axis Height 10.4 inch / 265 mm
Max. Height of work piece (Motorized Table, Standard laser head) 10.5 inch / 267 mm
Max. Height of work piece (No Motorize Table, Standard Laser head) 1-2.1 inch /27- 55mm
Max. engraving speed 23 inch/sec. / 600 mm/sec. Standard
Cutting speed depending on material, thickness, laser power
Motor 3 phase step motor
Driver 3 phase step motor driver
Work piece table Solid metal (Honey comb table)
Max. load of work piece table 35 kg
Net Weight 290kgs (639Ibs)
Lenses available (focal distance) 2, 0
”
Focus lens diameter 20mm
Reflector diameter 25mm
Beam combiner diameter 25mm
Dimensions
W x D x H 72.8
“x 51.2“x 41.7“/ 1850 x 1300 mm x 1060 mm
Max Part Size (W x L x H)
Front Door Closed 51.2
“x 36.6“x 10.6“/ 1300 x 930 mm x 270 mm
Pass-Through Door 51.2
“ x
∞
“x 1.2“/ 1300 x
∞
mm x 30 mm
Features
Standard:
Red Dot Pointer, Auto Focus, Motorized Table, Pass-Through Door, Air Assist, Water
Pump, Exhaust Fan, Honey Comb Table,
2,0”(50.8mm)Focus Lens, Easily Adjustable
Home Position, LCD Display, 3D Engraving,
“No Water “protection, Emergency Stop,
Open cover protection
Optional:
Rotary Attachment, Water Chiller Attachment, High Resolution head (up to 1000DPI, while
standard laser head Max is 500DPI), Air Compressor, Oil-Water Separator
Control System
Laser power Adjustable from 0 - 100% (typically 10-100%)
Interface Hardware USB: connect to PC and U-disk
Interface Software LaserGRAV
Operating Modes Optimized raster, vector, and combined mode
Buffer Memory 48MB Standard
