THUNDER LASER
MARS-120
www.thunderlaser.com
THUNDERLASER TECH CO., LTD
Tel :(86)755 82689501
23
3.5 Exhaust System
– Requirements
To guarantee the right ventilation during the engraving and the cutting. The device must
be equipped with a fine dust filter (generation of rubber dust) as well as an activated
carbon filter (neutralization of smells). A good filtering of the outgoing air is also required
when cutting plastics or engraving wood.
Connection - see section 3.7.3 connecting the Exhaust System.
Do not start the machine without an adequate exhaust system.
3.6 Computer
– Requirements
The following recommendation represents the minimum requirements. When using a
more powerful computer the graphics are generated and displayed faster and the
computing times and the data transfer to the laser are reduced. To use the newest
software version, you might have to abide other requirements.
•
Windows 7
Windows Vista (with Service Pack 1 or later)
Windows XP (with Service Pack 2 or later)
•
1024 MB of RAM, 400 MB of hard disk space
•
Pentium® 3 or 4
processor or AMD Athlon™ XP
•
1024 x 768 or better monitor resolution
•
1 free USB interface
•
CD drive
•
Mouse
