THUNDER LASER
MARS-120
www.thunderlaser.com
THUNDERLASER TECH CO., LTD
Tel :(86)755 82689501
25
3.7.2 Connecting the Computer and the machine by using the USB cable.
Like below:
3.7.3
Connecting the Exhaust System
Installation of the exhaust transposition. Insert one side of the gray exhaust pipe into the
fan inlet and the other side into the fuselage behind the exhaust tank. Insert one side of
the blue exhaust pipe into the fan outlet and put the other side of the pipe outside where
you work (If the machine is far from the outside of the room that the gas manufactured by
the machine cannot be discharged; then you might need an dust/fume filter, it can keep
the air quality of your working environment well).
Please refer to the following pictures about how to install the exhaust pipe: