THUNDER LASER
MARS-120
www.thunderlaser.com
THUNDERLASER TECH CO., LTD
Tel :(86)755 82689501
30
4.2 ON/OFF Switch
Switches the mains and the laser supply power ON/OFF.
The following conditions must be fulfilled for correct start up:
- Unrestricted freedom of motion of the mechanics
- No materials under the engraving table
- Protection covers closed
- When turn on the power of machine, and note that turn on the main switch first and then
the laser supply power.
If all covers are closed, immediately after being switched on, the device starts the
referencing process. When the referencing process is completed correctly, an acoustic
signal sounds and the device is ready for operation. The operation panel will display the
home screen when the laser is completed resets.
Before switching on the device, the user must make sure that no objects of
any kind are located inside the operating space, which could limit or obstruct the
mechanics of the device.
Tips
: When switching off the mains supply, all processing data is lost.
