14
Repeat track/disc
-
To repeat the currently playing chapter, press
A/B
for a about 1 second:
-
REP ONE
appears on the DVA or TV display.
-
To repeat the entire disc, press
A/B
for about 1 second:
-
REP ALL
appears on the DVA or TV display.
-
To exit repeat mode, press
A/B
a third time for about 1 second.
A/B repeat
To repeat or loop a sequence:
-
Press
A/B
briefly at your chosen starting point;
-
SET A
appears on the DVA or TV display.
-
Press
A/B
briefly at your chosen end point;
-
SET B
appears on the DVA or TV display, and the repeat sequence begins.
To exit the sequence, press
A/B
briefly.
5. Settings
In the configuration menu you can customize your DVA player in a number of areas
to suit your own particular requirements.
-
Press
[CONFIG]
to reach the settings menu.
-
Move to the function you want to change, using
ARROW DOWN
,
ARROW UP
, then use
ARROW LEFT
or
ARROW RIGHT
to scroll to your preferred option.
-
To exit the settings menu, select
EXIT SETUP
or press
[CONFIG]
again.
5.1 General setup
5.1.1 TV display
(Factory setting Pan Scan). If you have a regular 4:3 TV you can choose Letterbox
“LB” for a ‘wide-screen’ picture with black bars top and bottom or Pan Scan “PS” for a
full-height picture with the sides trimmed. If a disc has Pan Scan the picture moves
(scans) horizontally to keep the main picture on the screen. If you have a 16:9 TV
select “WIDE”.
5.1.2 Pic Mode
Select Pixel mode when in progressive mode: AUTO, FILM, VIDEO, SMART,
SSMART.
Auto: auto choice of best mode below in comparison with the disc inserted.
Film, Smart, S(uper)smart: Frame by frame + line by line. These three modes each
uses a slightly different algorithm strategy, and nothing else. We find SSmart to give
the best picture.
Video: Line by line de interlacing (preferable for recordings played over from VCR, or
a VCD home video). It is not recommendable to choose when watching a DVD.
