Chapter 5: Using the web interface
TT 98-122274-Q
Setting up the interfaces
96
information, leaving more bandwidth for the actual payload.
However, if the environment is noisy, the system will have to retransmit information, and you
may end up using more bandwidth than without Header Compression.
•
Header Compression disabled
: Recommended in noisy environments.
If Header Compression is disabled, the system will be less sensitive to noise.
Primary and secondary Profiles
A Profile is a collection of Quality of Service (QoS) settings and other settings defining the mode in
which data is transmitted on an interface. For example, a Profile is used to define whether a
connection should be a Standard or Streaming connection.
You can select between a number of predefined Profiles or define your own Profiles for your data
transmission.
In the EXPLORER 500, you need an Administrator password to define Profiles and Traffic Flow
Templates.
NAT (Network Address Translation)
NAT enables a local-area network to use one set of private IP addresses for internal traffic and an
assigned or static IP address for external traffic. The built-in NAT module in the EXPLORER 500
makes all necessary address translations between the local-area traffic and the external traffic.
If more than one user is connected to the LAN interface of the EXPLORER 500, it is necessary to
use a switch, as the EXPLORER 500 only has one LAN connector. If more than one user is
connected using a switch, you must select
Router mode
to use the NAT of the EXPLORER 500.
Note
If you have selected more than one Profile (one primary and one or more secondary
Profiles) for an interface, you must define a Traffic Flow Template before you can
establish a valid connection.
Содержание TT-3710A EXPLORER 500
Страница 1: ...USER MANUAL EXPLORER 500 Thrane Thrane A S info thrane com www thrane com ...
Страница 176: ......