Chapter 4: Using the interfaces
TT 98-122274-Q
Using a computer
66
Connecting to the LAN interface
This section does not describe configuration of the LAN interface. For information on
configuration, see Configuring the LAN interface on page 99.
To connect to the LAN interface, do as follows:
1.
Connect the LAN cable to the network interface of your computer.
A suitable cable is provided with your EXPLORER 500.
2.
Connect the other end of the cable to the LAN
connector on the EXPLORER 500.
3.
Power up the EXPLORER 500 and point the antenna as described in Pointing the antenna on
page 21.
After pointing, the connection is automatically established. By default, the connection is a
Standard data connection.
4.
Check the connection, e.g. by starting your Internet Browser.
If connection fails, check that the interface is enabled in the EXPLORER 500. If the LAN icon is not
present in the display Main screen and in the Dashboard in the web interface, the interface is
disabled. See Enabling or disabling an interface on page 50.
If connection still fails, refer to the Troubleshooting Guide on page 146.
Содержание TT-3710A EXPLORER 500
Страница 1: ...USER MANUAL EXPLORER 500 Thrane Thrane A S info thrane com www thrane com ...
Страница 176: ......