Thrane&Thrane TT-3710A EXPLORER 500 Скачать руководство пользователя страница 56

Страница: 56 / 192

Chapter 3: Using the display and keypad

TT 98-122274-Q

Dynamic information in the display

Types of display information

Text in the display can be:

•

Information of received messages.

•

Alarms.

•

Status information.

•

Request for action.

Received messages

When messages arrive in your EXPLORER 500, the
display indicates the number of new messages that have
arrived, and the red message indicator is flashing.

The messages can be SMS messages or notification of
voice mail.

•

If the message is an SMS message

, press

to view the message.

•

If the message is information of voice mail

, press

to go back to the Main screen.

The red message indicator will keep flashing until you have collected your voice mail.

•

To hear your voice mail, call the voice mail service number provided by your Airtime Provider.

•

To see the voice mail service number, select

PROPERTIES

VOICE

MAIL

NUMBER

Alarms

When alarms are issued in your EXPLORER 500, the
display indicates the number of new alarms, and the red
message indicator is flashing.

To view currently active alarms, press

. To ignore and continue, press

Содержание TT-3710A EXPLORER 500

































































































































































































Результаты поиска

Содержание TT-3710A EXPLORER 500

Отзывы:

Thrane&Thrane TT-3710A EXPLORER 500, Руководство пользователя, Страница: 56 / 192

Результаты поиска

Содержание TT-3710A EXPLORER 500

Отзывы: