Thrane&Thrane TT-3020C, Руководство по настройке

Страница: 31 / 96

TT-3022D Fishery Transceiver
Initial setup of transceiver
9-Nov-00 Page 3-5
3.3 TT-3022D Fishery Transceiver
The TT-3022D is an Inmarsat-C transceiver for Non-SOLAS appli-
cations. All software version can be used for fishery surveillance
but this manual describes feature available in V3.27 and above.
When receiving the transceiver the TT-3022D is default set without
fishery surveillance. Some configurations are necessary before
setting the transceiver on -air to fulfil the VMS requirements.
Figure 8TT-3022D Fishery Capsat Transceiver
3.3.1 Ocean registration
The TT-3022D transceivers will always automatically login into the
ocean region with the best signal if the transceiver is logged out of
the Inmarsat network.
However the preferred ocean can be configured by using the trans -
ceiver terminal command "SET -O" and the transceiver will then try
to login to this preferred ocean when going on -air for the first time.