Thrane&Thrane TT-3020C, Руководство по настройке

Страница: 46 / 96

Transceiver Configuration
Configuring the VMS behaviour
Page 4-12 9-Nov-00
When pressing the Stop button less than 4 seconds the button has
normal functionality i.e. acknowledging messages.
4.1.10.2 Set transceiver In-Port mode
If the entry is set to Yes/in-port mode then the stop button has the
same functionality as described in section 4.1.10.1 however:
•
if a Inmarsat PU interval connection is set-up for the VMS DNID
then
•
the connection will be changed to the long reporting interval as
described in section 4.1.23 Reporting intervals .
Position
time
Harbor
position
Short interval
Manual
position
report
Long interval
In-harbor
button
pressed
Figure 14 In-port button
This feature is useful when the vessel is in harbour or vehicle in
home town because it is reducing the number of position reports
and consequently also the cost.