Thrane&Thrane TT-3020C, Руководство по настройке

Страница: 56 / 96

Transceiver Configuration
Configuring the VMS behaviour
Page 4-22 9-Nov-00
The reporting intervals configuration are used together with the fo l-
lowing items: Long to short report interval change (please see sec-
tion 4.1.7), Set transceiver In-Port mode (please see section
4.1.10.2) and in Number of positions in storage queue (please see
section 4.1.21).
The fields are configured by entering 60 in the fishery command
entry.
4.1.24 Reporting interval change distance
This entry specifies the distance that the vessel/vehicle must move
before the reporting interval of the VMS position report is changed
from long to short reporting i nterval.
The different reporting intervals are used as described in section
4.1.7 Long to short report interval change
is changed and the dif-
ferent reporting intervals are configured as described in section
4.1.24 Reporting interval change distance .
The field is configured by entering 61 in the fishery command entry.
4.1.25 VMS DNID and VMS LES
This entry is used to specify which DNIDs in the DNID list that are
VMS DNIDs. Polls to the transceiver that changes the configur ation
of the transceiver will only be accepted by the transceiver if the
polled DNID is in this VMS DNID list.
If the entry “Use VMS DNID for special reports ” (page 4-16) is co n-
figured to
Yes then as soon as a match is found between this co n-
figuration and the DNID list the transceiver starts sending special
reports to the VMS DNID
. A DNID list can be listed by entering
“STATUS –D” in the Transceiver terminal.
DNIDs for all four oceans can be configured and it is important to
configure all ocean regions before shipping the equipment.