Thrane&Thrane Sailor SC4000 IRIDIUM, Руководство по эксплуатации

Страница: 8 / 36

4
How to make an Internal Call
Entering a telephone number on a handset follows the procedure
shown with this example:
1. Hook off either by removing the handset from the hook
or by pressing the hook key
2. Internal number, e.g. 1 0 0 1
3. Confirmation #
Factory setup of extension numbers are:
PSTN/PABX: 1000
Handset 1: 1001
Handset 2: 1002
Handset 3: 1003
Handset 4: 1004
Making a Manual Call
Provided that no internal or external calls are in progress and that
the handset is enabled and unlocked, it is possible to make an
internal call.
Furthermore, if a valid SIM card has been inserted into the SIM card
slot and the correct PIN code has been entered or the PIN code has
been disabled, it is also possible to make an external call.
In order to be able to make a manual call, the handset must either be
in ready state or inside the phone book. For a description on how to
return to ready state, see section “About this Manual”. If the idle text
differs from ‘Ready’ (e.g. SIM card messages) only internal calls are
possible.
Now in order to make a manual call, do the following:
1. Hook off.
If the system is occupied, a busy tone is heard in the earpiece/
speaker, and the display shows either
or
depending on whether an internal or external call is in progress.
Internal
call External
call
0641
If the system is ready to make a call, a dialling tone is heard in the
earpiece/speaker, and the display shows:
or
2. Use the numeric keys to key in the number you want to dial.
For external calls, first key: 0
To delete the previous digit, if desired, press:
An example
3. Confirm the call and start dialling by pressing:
4. Now the call will first be routed through the Iridium satellite
constellation and connecting to the earth station. This process can
take up to 30sec and is indicated by a deep, short tone puls in the
earpiece/speaker. When the call is connected to the normal phone
line network on ground the normal calling tones will be heard, and
display will show:
5. When the connection has been established, the display shows:
6. When one of the calling parties end the call or if for some reason
the call is dropped, the display will show:
Enter number
_
Type 0 for
ext. calls Enter number
_
Internal
calls only
Connecting
Connected to
0 0 0 4 5 7 0 1 3 7 0 0
0 _
Enter number
0 0 0 4 5 7 0 1 3 7 0 0
0 _
Call
terminated