Thrane&Thrane Sailor SC4000 IRIDIUM, Руководство по эксплуатации

Страница: 28 / 36

24
Software Version
Primarily for service purposes, it is possible to get information about
the version of the software for the following pieces of hardware in
your Iridium equipment:
• Transceiver: This software handles the configuration of your
Iridium equipment, audio routing, the information to be shown on the
displays, communication with your SIM card, etc.
• LBT: Readout of the LBT IMEI number (International Mobile
Equipment Identity number)
• Handset: This software consists of low level drivers (for each
control unit) that control the display, the key pad, and the micro-
phone, earpiece and speaker.
To get information on these software modules, go through the
following steps:
1. To enter the function menu, press:
2. Find the item “System” using and press:
3. Find the item “SW version” using and press:
4. Choose the hardware whose software version you want informa-
tion on, using and press:
Resetting
Primarily for service and test purposes, it is possible to reset your
Iridium equipment to force it into a well-defined state. The following
different levels of resetting are available:
• Restart: No configuration information or user data (call log, user
list, phone book) are deleted. When this command is issued/chosen,
all control units are forced back to ready state regardless of their
current state.
• Factory reset: NOTE! ALL (!) configuration information AND
(!) user data (call log, user list, phone book) are deleted. When this
command is issued, your Iridium equipment returns to the state it
was in when leaving the factory.
To restart your system:
1. To enter the function menu, press:
2. Find the item “System” using and press:
3. Find the item “Reset” using and press:
4. Find the item “Restart” using and press:
5. To confirm that you want to restart the equipment, press:
0641