Thrane&Thrane Sailor SC4000 IRIDIUM, Руководство по эксплуатации

Страница: 18 / 36

14
3. Find the item “Global” using and confirm by
A list of all outgoing calls made from the system can now be
retrieved by choosing the item “Outgoing” and pressing
To see more details about a specific call, find the call using
and confirm by
Alternatively, the account of each user can be retrieved as shown
below:
1. Follow steps 1-3 above.
2. Find the item “Account” using and confirm by
The available items are now:
To select e.g. a specific user, choose “Users” and press
Now, find the user by means of and press
Print Call Log to a Personal Computer
Connect a PC/Laptop to the RS232 service interface port with a
standard 9 wire serial cable. (RX on pin 2, TX on pin 3 and Ground
on pin 5)
On the PC/Laptop you can use a terminal program (e.g. hyper
terminal) to read out the call log.
Terminal port set-up: 9600 baud, 8 data bit, no parity and 1 stop bit.
In the terminal program press ESC twice and you will
see:
Thrane & Thrane a/s service interface
SI>
The call log can be read out in 3 different modes.
1) Continues print mode
2) Latest calls
3) Calls made by a specific user
The call log record format is as follows:
[Date], [Time], [Call duration], [User name], [Subscriber name],
[Telephone number]
An example:
A call made April 4, year 2004, time 12.01.22, by SUPERUSER to a
telephone number 00045 70101155 (labelled with HOME in the
address book) and the call duration was 1 minute and 16 seconds.
Will be read out as:
04/04-2004,12:01:22,01:16,SUPERUSER,HOME,0004570101155
A comma separates each position.
Continues print mode
To read out a list of all completed calls, write “CALLS ON” on the
command line and press enter.
An example:
SI> CALLS ON [enter]
Now the call records are listed continuously until the mode is
disabled or the transceiver unit is restarted.
To disable the continuous print mode write “CALLS OFF” on the
command line and press enter.
An example:
SI> CALLS OFF [enter]
>Users
Phone
Unknown
Deleted Users
0512