Thrane&Thrane Sailor SC4000 IRIDIUM, Руководство по эксплуатации

Страница: 25 / 36

21 0512
Call Forwarding
NOTE: This feature is a supplementary service available from
the Iridium network. Thrane & Thrane has no influence
on the availability and cannot guarantee that the service
is available. Please check the availability with your
Iridium Service Partner.
The Iridium network offers the possibility of forwarding incoming calls
to another phone number. This facility can be configured from your
Iridium equipment. The call forwarding can be divided into the
following two categories:
• Forward all calls: All external incoming calls will immediately be
forwarded to the number you specify when you activate this
category.
•
Forward on not reachable: When your Iridium equipment has
been turned off or cannot for some reason be contacted by the
network or when the line of your Iridium equipment is occupied,
either by an internal or an external call, external incoming calls will
be forwarded to the number you specify when you activate this
category.
Note: By default, the above two categories of calls will all be
forwarded to your personal mailbox. When you activate a category,
the calls in this category will be forwarded to the number that you
specify and no longer to your personal mailbox.
In the following, the procedures for activating, restoring and review-
ing settings for the above two categories are described. As usual,
when manually dialling a number to call, this must be done from
ready state.
Forwarding all Calls (Unconditional Call
Forwarding)
Activate:
1.
Hook off
2. Enter the following code *21*00 [country code]
[telephone number] # OK
by pressing the keys:
[country code] [telephone number]
Cancel:
1.
Hook off
2. Enter the following code #21#OK
by pressing the keys:
Review forwarding number:
1.
Hook off
2. Enter the following code *#21#OK
by pressing the keys:
Cancel All Forwarding
Activate:
1.
Hook off
2. Enter the following code #002#OK
by pressing:
Reactivate and restore previous settings:
1.
Hook off
2. Enter the following code *004#OK
by pressing: