Thrane&Thrane Sailor SC4000 IRIDIUM, Руководство по эксплуатации

Страница: 19 / 36

15 0512
DATE-TIME
>Status
Set
Sys.update
Latest calls
To read out a list of the latest calls, write “CALLS [number of last
calls] on the command line and press enter. Up to 50 calls can be
listed.
An example:
SI> CALLS 27 [enter]
When following this example, the last 27 calls will be read out,
starting with the latest call.
Calls made by a specific user
To read out calls made by a specified user, write CALLS [USER
NAME]
An example:
SI> CALLS SUPERUSER [enter]
This will sort out all calls made by SUPERUSER among the last 50
calls in the call log and read out each record.
Setting Time and Date
Time and date can be displayed and adjusted manually. The time is
used in the call log. Adjusting the time requires that the user is
identified with a priority value of 4 or less (Commander, Captain, or
SUPER USER).
1. To enter the function menu, press:
2. Go to the “System” item using:
and press:
3. Go to “Time/date” using:
and press:
You can now choose between “Status”, “Set”, “System update”,
“GPS update” and “CNT update”
Status: Shows current time and date (from system).
Set: Allows you to edit time and date manually, using the numeric keys.
Sys. update: If this option is chosen, the time written in the display
is updated using an internal clock in the transceiver unit.
If power is removed from the transceiver the clock will continue
running for up to 24 hours.
GPS. update: If this option is chosen, the time written in the display
is updated using the connected GPS, if any. Consequently, even if
your Iridium system is turned off and then on again, the clock will still
be adjusted to the correct time each time a GPS update is received.
If no GPS is available, it makes no sense choosing this option.
CNT. update: If this option is chosen, the time written in the display
is updated using a software counter. Consequently,
if your Iridium system is turned off and then on again, the
clock will be reset to a default time. The correct time must then be
set again manually each time.
Setting Dimmer and Contrast
To adjust the background light and the contrast level, first press the
two keys:
The dimmer/contrast menu appears:
Set
Sys.update
GPS.update
>CNT.update
DIM/CONTRAST
>Dimmer
Contrast