THORLABS WFS150, Руководство по эксплуатации

Страница: 98 / 123

96 WFS150 / WFS150C Manual
© <2007> ... Thorlabs GmbH
When this check box is marked the software will continuously send setup and
result data of the Wavefront Sensor measurement to the DataSocket server. See
Available Data Items for a description of the available data items.
Enable wavefront data
When this check box is marked the software will automatically send the entire
wavefront data array to the DataSocket server. Because the amount of data can
be considerably it can be disabled to increase transfer speed. See
Available Data Items for a description of the available data items.
4.3.10.2 Available Data Items
When ' Enable basic data ' is checked on the DataSocket configuration panel the
following data items from the actual Wavefront Sensor measurement are sent to
the DataSocket server. As soon as a measurement is complete the data on the
DataSocket server is updated.
Measurement results in 'float' format may contain the coding 'NaN' which stands
for 'Not A Number'. This indicates that the parameter is not available. Data is split
in two groups, Wavefront Sensor settings and measurement results.
Wavefront Sensor settings are:
Data Item Format Unit / example
Instrument_Name string e.g. "WFS150C Wavefront
Sensor"
Serial_Number string e.g. "M00224955"
Wavefront_Unit_Um_Waves short 0 = µm, 1 = waves
Wavefront_Data_EntireArea_Pupil short data relate to 0 = entire
area, 1 = pupil
Wavefront_Type_Meas_Recon_Diff short 0 = measured, 1 =
reconstructed, 2 =
difference
Zernike_Orders short number of Zernike orders
Zernike_Modes short number of Zernike modes