THORLABS WFS150, Руководство по эксплуатации

Страница: 8 / 123

6 WFS150 / WFS150C Manual
© <2007> ... Thorlabs GmbH
back shipment.
In case of shipment from outside EU duties, taxes etc. which should arise have to
be carried by the customer.
Thorlabs warrants the hard- and software determined by Thorlabs for this unit to
operate fault-free provided that they are handled according to our requirements.
However,
Thorlabs does not warrant a faulty free and uninterrupted operation of
the unit, of the soft- or firmware for special applications nor this instruction
manual to be error free.
Thorlabs is not liable for consequential damages.
Restriction of warranty
The warranty mentioned before does not cover errors and defects being the result
of improper treatment, software or interface not supplied by us, modification,
misuse or operation outside the defined ambient conditions stated by us or
unauthorized maintenance.
Further claims will not be consented to and will not be acknowledged. Thorlabs
does explicitly not warrant the usability or the economical use for certain cases of
application.
Thorlabs reserves the right to change this instruction manual or the technical data
of the described unit at any time.
1.3 WEEE
As required by the WEEE (Waste Electrical and Electronic Equipment Directive)
of the European Community and the corresponding national laws, Thorlabs offers
all end users in the EC the possibility to return "end of life" units without incurring
disposal charges.
This offer is valid for Thorlabs electrical and electronic equipment
·
sold after August 13
th
2005
·
marked correspondingly with the crossed out "wheelie bin" logo (see fig. 1)
·
sold to a company or institute within the EC
·
currently owned by a company or institute within the EC
·
still complete, not disassembled and not contaminated
As the WEEE directive applies to self contained operational electrical and
electronic products, this "end of life" take back service does not refer to other
Thorlabs products, such as
·
pure OEM products, that means assemblies to be built into a unit by the
user (e. g. OEM laser driver cards)
·
components
·
mechanics and optics
·
left over parts of units disassembled by the user (PCB's, housings etc.).
If you wish to return a Thorlabs unit for waste recovery, please contact Thorlabs
or your nearest dealer for further information.