THORLABS WFS150, Руководство по эксплуатации

Страница: 45 / 123

43 Operating Instruction
© <2007> ... Thorlabs GmbH
setting is stored and is applied when the Wavefront Sensor application software
is started again.
At first program start all Wavefront Sensor settings and GUI configurations are
set to default values. Read the
Wavefront Sensor Setup Panel chapter carefully
and configure the Wavefront Sensor software according to the beam properties
and your specifications.
4.3.2
Operating the Wavefront Sensor Software
Now let's get familiar with the Wavefront Sensor GUI.
You can either use the menu or just click a symbol on the tool bar to operate the
Wavefront Sensor application software.
4.3.2.1
Menu and Toolbar
The toolbar allows access to the most common menu functions by simply clicking
on the appropriate symbol.
Toolbar symbols are standing for:
Save Measurement Data
Print Window
Setup Wavefront Sensor
Start Measurement
Stop Measurement
Calibrate with Plane Wavefront
Calibrate with Spherical Wavefront
Show Help File
The following list contains all menu entries and also lists the appropriate short cut
keys and toolbar symbols
File
Measurement File Preferences
Save Measurement Data (Ctrl + S)
-------------------------------------
Print Window (Ctrl + P)
Print Graph Only
-------------------------------------
Exit Program