THORLABS WFS150, Руководство по эксплуатации

Страница: 53 / 123

51 Operating Instruction
© <2007> ... Thorlabs GmbH
The example illustrates the effect when the 'Noise cut level' is changed from 0
(left) to 50 (right).
Double click on the graph to see the ' Lineview Configuration ' panel.
The option ' Show Min/Max Lines ' is enabled by default and will display a graph
with two curves. Each point of the upper curve (white) displays the maximum and
each point of the lower curve (gray) displays the minimum intensity of the
appropriate CCD column.
Switch to ' Show Single Line ' in order to enable selection of a single line out of
the CCD array. Enter the line number into the control ' Selected Line ' to see the
intensity distribution of the appropriate CCD row. The line number ranges from 0
(bottom) to the number of vertical pixels - 1. The selected line is marked within
the
Spotfield Panel .