THORLABS vytran GPX3800, Руководство пользователя

Страница: 35 / 81

GPX3800 and GPX3850 Glass Processors Chapter 5: Operation
Rev B, July 24, 2018 Page 31
Fiber Type Parameter 1 (P1) Parameter 2 (P2)
Generic OD Ratio N/A
Panda Core Center to Stress Rod
Center, (Pixels).
Stress Rod Diameter
(Pixels)
Elliptical Core Core Center to edge of ellipse,
Minor diameter (Pixels).
Core Center to edge of ellipse,
Major diameter (Pixels).
Bow Tie Core Center to Stress Rod
Center, (Pixels).
N/A
Figure 11 PM Fiber Parameters
Note that “OD Ratio” represents the fraction of the fiber diameter which will be used to calculate the fiber end
angle. It is the fraction of the fiber diameter that contains the PM Structure.
5.5.7. Multiple-Stage and Multiple File Splicing
For certain special applications, the system can run several splice steps in a sequence. The setup window can be
accessed from Menu Bar>Splice> Splice Parameters>Multiple-Stage Splice.
Users can set up all the parameters for each splice step, and add or remove splice steps in the Splice Properties
Window.
Splice Properties Window
Users can add or remove multiple pre-saved splice files in the Multiple File Splice Properties Window. The system
will perform the splicing function according to the sequence of the files in this window.
Multiple File Splice Properties Window