THORLABS TXP5016, Руководство по эксплуатации, Страница: 29 / 44

© 2017 Thorlabs GmbH
6 Maintenance and Service
27
6.4.4 Network Configuration
The TXP5016 has an internal web server that is accessible via the RJ45 jack on the front
panel. The IP address of the TXP5016 is factory set to
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
This is a commonly used in Local Area Networks address range. In order to establish a
connection between the TXP5016 and your control PC, the IP address range must match and
must not conflict with other network devices.
Attention
In order to prevent network conflicts, it is strongly recommended to contact your System
Administrator for a free IP address and the appropriate subnet mask.
Note
The TXP5016 can be connected
·
to the LAN (local area network) using the supplied standard patch cable or
·
directly to the RJ45 jack of your PC using the supplied cross-over patch cable.
Both connections require the correct network address match.
Change the Network Configuration
Click the button
Now enter the required IP Address and Subnet Mask. For gateway operation, check the Use
Gateway box and enter the gateway IP address in the bottom line. Then click Transfer . The
TXP5016 reboots to finalize the configuration.