Appendix E
68
HA0303T Rev A Feb 2014
LLGetStatusBits
Gets the controller status bits encoded in 32 bit integer.
LLSetGetDigOPs
Sets or Gets the user digital output bits encoded in
32 bit integer.
LoadParamSet
Loads stored settings for specific controller.
ReadPositionDemands
Returns the present values for the XPos and YPos
position demand signals (-10 V to +10V)
ReadSumDiffSignals
Reads the present values for the SUM, XDIFF and
YDIFF signals
SaveParamSet
Saves settings for a specific controller.
SetDetectorHead
Sets the type of detector head being used
SetDispIntensity
Sets the front panel LED display intensity.
SetLoopFilterParams
Sets the Derivative and Notch Filter values.
SetPIDParams
Sets the proportional, integration and differential
feedback loop constants.
SetPosDemandMinMax
Sets values which specify the present settings for
the XPos and YPos minimum and maximum limits
SetPosDemandParams
Sets values which specify the position demand
(Xpos and Ypos) to values, depending on whether
open loop or closed loop operating mode is selected
SetPositionOutputs
Sets values for the open loop position demand
signals (-10 V to +10V)
SetQuadDispMode
Sets the present display mode setting.
SetQuadMode
Sets the current operating mode either open loop,
closed loop or monitor mode.
SetSigOutputParams
Sets the signal routing of the XDIFF and YDIFF or
XPos and YPos signals, either via the rear panel
SMA connectors or via the USB hub internal comms
lines.
ShowEventDlg
Shows the event dialog when it has previously been
disabled using the EnableEventDlg method
StartCtrl
Starts the ActiveX Control (starts communication
with controller)
StopCtrl
Stops the ActiveX Control (stops communication
with controller)
Properties
APTHelp
Specifies the help file that will be accessed when the
user presses the F1 key. If APTHelp is set to 'True',
the main server helpfile MG17Base will be launched.
HWSerialNum
specifies the serial number of the hardware unit to
be associated with an ActiveX control instance.
