3.4 System command group
TED350 / page 41
3.4.3 Querying the error queue
Syntax:
"
:SYST:ERR?
"
Response:
[0, "No Error"]
Description: Queries the error queue of the TED350. The reply consists of the
following sequence: <Error No.>, "<Error text>". If the error queue is
empty:
[0, "No error"]
will response.
(Please refer to chapter 3.7, “Error messages of the TED350“ starting on page 49)
3.4.4 Oversampling rate
Programming:
Syntax:
"
:SYST:OSR <NR1>
"
Valid Range: 0..7
Default Value: 5
Description: Sets the TED350 oversampling rate (see table below).
Reading:
Syntax:
"
:SYST:OSR?
"
Response:
[<NR1>]
Description: Queries the oversampling rate.
Sampling rate
Resolution
Measurement speed
0
11 Bit + sign
18 / s
1
12 Bit + sign
13 / s
2
13 Bit + sign
10 / s
3
14 Bit + sign
8 / s
4
15 Bit + sign
6 / s
5
16 Bit + sign
4 / s
6
17 Bit + sign
3 / s
7
18 Bit + sign
2 / s
Table 3
Oversampling rate
