THORLABS M2MS, Руководство по эксплуатации

Страница: 45 / 167

BP209 Series 6 The Graphics User Interface (GUI)
Rev: 8.1, 14-Feb-2022 © 2022 Thorlabs Page 43
Note
· If the slider "Speed - Quality" is in the far right position, the 3D image is displayed with
highest quality.
· The higher the 3D image quality is set, the more system resources are used. Depending
on the system capabilities, the software may slow down.
6.6.3 X and Y Profiles
Both windows can be opened and closed via the menu item "X Profiles" or "Y Profiles" in the
window menu or clicking on the appropriate toolbar symbols.
X and Y profiles display the intensity along the appropriate axes as marked on the front panel
of the Beam Profiler.
The yellow curve shows the measured profile, while the red curve shows the approximated
Gaussian fit function and the blue - the approximated Bessel fit. The curves can be shown
/ hidden by toggling the appropriate button above the diagram.
If "Autoscale to Peak" is enabled, the measured curve shows relative intensities from 0 to
100%, where 100% denotes the maximum value of intensity on X and Y axis.
If the "Autoscale to Peak" function is disabled, the X and Y profiles will show a peak amplitude
equal to the AD converter saturation of the appropriate slit pair.
The amplitude of the Gaussian fit curve may be lower or even higher than the peak intensity of
the measured curve.
143 144