THORLABS LEDD3 Series, Руководство по эксплуатации

Страница: 21 / 62

19 Operating the LEDD3
© 2009 Thorlabs
Figure 15a LED Maximum Current
Figure 15b LED Maximum Frequency
G
Attention
G
A wrong and too high LED maximum current limit can cause damage to the
LED. Prior to changing the LED maximum current limit of the LED head
check if the LED can handle this current!
System Settings
Within the system configuration the LCD backlight brightness can be set. Select
'Configuration' from the main menu via the multi-control knob and press 'Ok'. A sub
menu appears and the 'Brightness' setting can be accessed by pressing the 'Ok'
button. The multi-control knob is used to change the brightness of the LCD backlight
between 0 and 100%. Confirm your setting with 'Ok' or cancel it with 'ESC'.
Figure 16 LCD Backlight Brightness Setting