5.2 Selecting the line voltage
LDC340 / Page 68
5.2 Selecting the line voltage
The line voltage can be selected with the line voltage selector on the rear of the
LDC340. The LDC340 can be operated with 100 V 115 V or 230 V.
5.3 Exchanging the line fuse
If the line fuse has opened due to line disturbances, incorrectly set voltage or other
influences from the outside it can be exchanged at the rear without opening the unit.
Attention
To avoid fire hazard only the appropriate fuse for the corresponding
line voltage is to be used:
100 V / 115 V : T4H250V
230 V : T2H250V
(IEC 60127-2/V, 5 x 20mm, 250 V, slow response)
mains plug with fuse and spare fuse
Figure 8
Rear view of the LDC340
•
Switch off the LDC340 and remove the mains cable from the mains jack.
