12
HA0373T Rev Ck May 2017
Chapter 3
3.2.3
Using the Baseplate
The baseplate is supp lied with magn ets for qu ick positioning on an optical
worksurface. For more secure positioning, it can be bolted to the worksurface before
the K-Cube is fitted, as shown below. The K-cube is then located on two dowels in the
baseplate and secured by two clips.
Fig. 3.1 Using The Baseplate
3.3
Electrical Installation
3.3.1
Rear Panel
Fig. 3.2 Rear Panel Connections
DETECTOR IN
– used to conne ct the detector (compatible with Thorlabs PDQ and
PDP series detectors) - see Section A.2. for pin out details.
SUM, X DIFF
and
Y DIFF
(Female SMA connectors)
– Used to output the signals from
the detector to the rest of the system. Typically, the sensor head is a quad photodiode
