manualshive.com logo in svg

THORLABS CAL110, Руководство пользователя, Страница: 5 / 68

Поделиться
Скачать
THORLABS CAL110 Скачать руководство пользователя страница 5

SD-OCT Base Unit

 

Chapter 1: Introduction

 

Rev E, November 7, 2018 

Page 1 

Chapter 1 

Introduction 

ATTENTION 

Please read the instruction manual carefully before operating the OCT base unit. All statements 

regarding safety and technical specifications will only apply when the unit is operated correctly.  

This equipment is intended for laboratory use only and is not certified for medical applications, 

including but not limited to life support situations. 

Refer to this manual whenever the following symbols are encountered on the OCT base unit: 

Attention symbol indicates that additional information is given in this manual. 

 

Laser Safety symbol indicates that laser radiation is present. 

 

This manual describes the SD-OCT base units of the Telesto, Ganymede, and Callisto Series. 

If not specified, the base units of the Telesto-PS Series are incorporated in the Telesto Series.  

ATTENTION 

Check the supply voltage of the system before plugging in the computer. Make sure the included 

power cords for the base unit, computer, and monitor are connected to a properly grounded 

outlet (100 – 240 VAC; 50 – 60 Hz).  

Transportation and delivery may cause the OCT base unit to be warm or cool upon receipt. 

Please wait for the system to reach room temperature before attempting to operate. 

Operate this system on a flat, dry, and stable surface only. 

 

WARRANTY WARNING 

Do not open the base unit, imaging scanner or PC. There are no user serviceable parts in this 

product. Opening the device will void your warranty. Any modification or servicing of this 

system by unqualified personnel renders Thorlabs free of any liability. This device can only be 

returned when packed into the complete original packaging, including all foam packing inserts. 

If necessary, ask for replacement packaging. 

 

 

Содержание CAL110





































































Отзывы:

Нет отзывов