THORLABS CAL110 Скачать руководство пользователя страница 62

Страница: 62 / 68

SD-OCT Base Unit

Chapter 8: Warranty

Page 58

MTN012389-D02

Chapter 8

Warranty

8.1. Lasers and Imaging Systems

Thorlabs offers a one year warranty on all lasers and imaging systems, with the exceptions of laser diodes.

8.2. Non-Warranty

Repairs

Products returned for repair that are not covered under warranty will incur a standard repair charge in addition

to all shipping expenses. This repair charge will be quoted to the customer before the work is performed.

8.3. Warranty

Exclusions

The stated warranty does not apply to products which are (a) specials, modifications, or customized items

(including custom patch cables) meeting the specifications you provide; (b) ESD sensitive items whose static

protection packaging has been opened; (c) items repaired, modified, or altered by any party other than Thorlabs;

(d) items used in conjunction with equipment not provided by or acknowledged as compatible by Thorlabs; (e)

subjected to unusual physical, thermal, or electrical stress; (f) damaged due to improper installation, misuse,

abuse, or storage; (g) damaged due to accident or negligence in use, storage, transportation, or handling.

Содержание CAL110





































































Результаты поиска

Содержание CAL110

Отзывы:

Похожие инструкции для CAL110

Бренды по названию

Популярные бренды

THORLABS CAL110, Руководство пользователя

Результаты поиска

Содержание CAL110

Отзывы:

Похожие инструкции для CAL110

Бренды по названию

Популярные бренды