THOR Jayco TALON 2021, Руководство пользователя

Страница: 97 / 209

95
Section 6: Electrical System
Menu Display (between arrow buttons) use the arrow keys to scroll
through the following selections:
Menu Display shows
A1 or A2 (awnings) Cycle between awnings
with the arrows.
○ Press and hold EXT or RET to extend or retract the
selected awning.
○ Menu Display shows b1 or b2 (bunk lifts)
Cycle between bunk lifts with the arrows press EXT or
RET to operate.
○ Menu Display shows J1, J2, J3 or J4 (Jacks)
Cycle between jacks then press EXT or RET to operate.
○ Menu Display shows S1, S2, S3 or S4 (slideouts)
Cycle between slides using the arrow buttons.
○ Press and hold EXT or RET to extend or retract the
selected slideout.
○ Menu Display shows OF (must then press the EXT
button) to turn off all loads (lights and fans plus touch -
screen). This does not shut down the generator. Press
any of the numbered light buttons to turn the touchscreen
back on.
○ Menu Display shows PA (pair):
○ Press EXT to pair your phone or tablet
○ Or press
RET
to pair one of the wall mounted remote
controls.
○ The PA on the small display will begin flashing on and
off indicating the system is in pairing mode and you can connect your Bluetooth
smart device. When the
device is paired,
PA
display
will go out.
Turning on the touchscreen system:
Normally when power is turned ON to
the RV, the touchscreen system auto-
matically boots up.
If the touchscreen system requires a
reset for some reason, or if the touch-
screen has been turned off:
○ Pressing either of the arrow keys, or a numbered key will turn the system ON.
( EXT or RET keys will not turn on the system).
○ Two splash screens with the BMPro logo will appear first during boot up.
○ The screen shown here ( Fig 1 ) appears after the two splash screens.
○ To go directly to the RVMaster touchscreen, press the icon for the touchscreen.
(shown enlarged in the yellow box) or if you just let the boot up process finish, it
should go directly to the touchscreen.
○ The RVMaster touchscreen is now active and ready to use.
NOTE: Pressing the RESET button on the touchscreen (See Touchscreen
Control Panel) will also reboot the touchscreen.