THOR Jayco TALON 2021, Руководство пользователя

Страница: 129 / 209

127
Section 7: Fuel & Propane System
Installing Propane Cylinder(s)
Single Cylinder Mounted On A-Frame (if so equipped)
1. Connect the 3/8” low pressure hose to the outlet of
the two stage regulator.
2. Attach the regulator with the “Z” bracket on the cen-
ter of the front wall with the vent pointing down.
3. Attach the protective plastic cover to the regulator.
4. The regulator has a 90° elbow that directs the inlet
toward the trailer curbside.
5. Place the cylinder on the bracket provided on the
A-frame and position it so the outlet of the cylinder
valve is pointed directly outward to the curbside wall.
6. Attach the 1/4” inverted flare x 24” Type 1 pigtail
hose to the regulator inlet and the right hand swivel nut
to the cylinder valve.
7. Secure the cylinder to the A-frame bracket using
the bolts, nuts and washers provided.
Double Cylinder Mounted On A-Frame (if so
equipped)
When a second cylinder is installed, a tee check valve is
used to replace the 90° elbow at the top of the regulator
and another 1/4” inverted flare x 24” Type 1 pigtail is
added. The regulator stays in the original position.
Make sure all fasteners are secured before traveling.
Single Cylinder
Double Cylinder
Traveling With Propane
Use care when fueling your motor fuel tanks and/or
propane containers. Make certain your propane tank
is properly fastened in place.
This label should be kept permanently affixed to your
recreation vehicle.
NOTE: Some states prohibit propane appliances to be operated during
travel, especially in underground tunnels. Know the laws for the areas
where you travel.
Refueling Warning Label