THOMSON ViBE VS7000, Руководство пользователя

Страница: 67 / 276

Chapter 3 ’Web Browser Interface’ — Basic Settings
ViBE VS7000 67
User Manual
a. Enter the network storage where the TS file to use as a source is
stored.
b. Enter the name of the folder on the network storage where the
TS file to use as a source is stored.
c. Enter the name of the TS file to use as a source.
4. Select the standard of the input stream: MPEG-2, DVB or ATSC.
The snapshot view is automatically created and updated.
To delete the snapshot view, you can either click the cross button in the
Snapshot panel, or remove the job corresponding to the snapshot view
in the Jobs tab.
Figure 3-39. Deleting a snapshot view
Creating a Snapshot View From a Workflow
When creating a workflow that contains a TS over IP input or a TS file
input, you can specify directly in the input configuration that you want to
create a snapshot view.
To do so, set the Monitoring view parameter to true , and specify the
Standard parameter by choosing the table on which the tree should be
based.
Figure 3-40. Creating a snapshot view from a workflow (TS over IP input)
A snapshot view is automatically created when a job based on this
workflow is launched. Click the Play button to start displaying and
updating the view. It is dynamically updated as long as the job is running.
It is deleted when the job is deleted.