THOMSON ViBE VS7000, Руководство пользователя

Страница: 43 / 276

Chapter 3 ’Web Browser Interface’ — Basic Settings
ViBE VS7000 43
User Manual
3. In the array, double-click the cells in the Value column to enter your
values. If you need details on the parameters, refer to section Section
’Workflow Library Content Parameters’ on page 104.
4. Click Create .
The job is displayed in the Jobs list . Check its status and its state.
For more information on the Jobs tab, see Section ’Jobs’ on page 96.
Creating a Job Based on a Sample Workflow
Sample workflows are provided with the ViBE VS7000 equipment. To use
them, proceed as described in
Section ’Creating a Job’ on page 40
above.
When selecting a sample workflow from the list of workflows, you have
to set a number of parameters before launching the job. These
parameters are split into different tabs.
Browse the tabs and set the parameters shown in the figures.
Once you are done, click Create .
Sample IP TV 1
The Sample IP TV 1 workflow generates an IP TV MPEG-2 transport
stream.
The source is a program issuing from a TS over IP stream.
The video is transcoded into H.264. Audio components can be
transcoded or sent in pass-through mode. Other components are sent in
pass-through mode.
The output stream is TS over UDP/IP or TS over RTP/UDP/IP.
The figures below show the different tabs and parameters to set in the
Sample IP TV 1 workflow.
Figure 3-7. Sample IP TV 1 workflow – Input TS tab
If you need details on the parameters, refer to Section ’Workflow
Library: Inputs’ on page 109.