THOMSON ViBE VS7000, Руководство пользователя

Страница: 141 / 276

Chapter 3 ’Web Browser Interface’ — Workflow Library Content Parameters
ViBE VS7000 141
User Manual
„ Push on remote Web server : if set to true , the manifest and chunks are
posted to a remote Web server, an IIS server for example. In this case,
set the following parameters:
™ Remote Web server URL : indicate the LAN used to communicate
with the remote Web server. If the remote Web server URL
contains a name instead of an IP address, you must configure
the DNS in the
System tab, in the IP category (see Section ’DNS’
on page 71).
If you do not wish to use the IP address resolution by DNS, you
can also directly enter the IP address of the remote Web server
in the
Remote Web server IP address field.
™ Authentication type : set to true if the remote Web server
requires an authentication, and enter the User name and
Password .
„ Encrypt files : if set to true , DRM is activated. Set the following
parameters:
™ Algorithm : two algorithms are available:
- AES CBC
- AES CTR
™ Key server connection : select from the drop-down list the
conditional access server to which ViBE VS7000 should connect
to get the key. If set to
None , ViBE VS7000 generates the key
itself. Otherwise, enter the specific parameters of the CAS
server:
- Key server URL : URL of the CAS server.
- Use authentication ( BuyDrm ): set to true if the CAS server
requires an authentication, and enter the User name and
Password . Also specify the HTTP Key server authentication
type ( auto , basic or digest ).
- Key server user name ( Irdeto ): enter the user name required
to access the Irdeto key server.
- Key server password ( Irdeto ): enter the password required
to access the Irdeto key server.
- Server key , User key , Key Id and Media Id ( BuyDrm ): enter
the values provided by BuyDrm.
- Account Id ( Irdeto ): identifier of the account to connect to
the Irdeto server.
- Content id : identifier of the program to encrypt (string).