•
Direct the jet nozzle towards the surface to be steamed. Use a
gentle back-and-forth motion on the surface to be cleaned to
improve steam efficiency. To disinfect surfaces, turn the steam
control dial to UP and hold the steam outlet about 20cm from the
surface to be cleaned for at least 5 seconds. It will kill germs and
bacteria with great efficiency.
•
When using the window squeegee, first treat the glass or mirror
thoroughly with steam, then turn off the steam. Then squeeze the
squeegee against the top of the glass or mirror and gently pull it
down. Do this by moving slowly from side to side until the entire
surface is clean.
•
Wipe the steamed surfaces with a clean cloth to remove loosened
dirt. We recommend that you wipe down the surface in question
while it is wet, but be careful when wiping metal surfaces, for
example, as they can be hot.
STEAM TREATMENT OF CLOTHING
•
Install the window squeegee with the microfiber wipe.
•
For generally easier steam passage, remove the extension tube to
use the steam mop in hand-held mode. However, you can use the
extension tube to reach hard-to-reach places, such as tall
curtains. MAKE SURE TO HOLD THE EXTENSION TUBE IN BOTH HANDS
WHEN LIFTING IT.
•
Follow the General Instructions for Use to start using steam. See tips
Select Steam Setting to choose the correct steam intensity setting
for the material you want to clean.
•
For fabrics and bed linen, point the multifunction head towards
the surface to be steamed and leave it there for three seconds.
Use a gentle back-and-forth motion across the surface to be
steamed to improve steam efficiency.
For the clothes :
•
Hang the garment on a clean, rust-free hanger.
•
Point the window squeegee with its microfiber cloth towards the
bottom of the garment. Steam will rise on the interior and exterior
EN-18
