PRODUCT INFORMATION
(1)
The steam nozzle
emits a stream of hot steam capable of
penetrating materials. The mop head, jet nozzle and multi-
function head attach to the steam nozzle.
(2)
The water tank
is the tank containing the water before it is
transferred to the boiler where it is transformed into steam. The
water tank holds 380 mL of water.
(3)
The water tank cap
covers the water tank fill hole and should
be
removed before filling the water tank with water.
(4)
The power indicator
(3) illuminates when the steam control dial is
set to one of the three steam intensity settings. It indicates
whether the device is on and heating up.
(5)
The steam control dial
turns the unit on or off. It is used to select
the desired steam intensity (three settings available - HIGH and
LOW).
(6)
The ignition handle
is convenient to assemble and disassemble
to get the device ready as quickly as possible.
(7)
Cord clips
provide a safe and convenient way to store the
power cord when not in use. (under the hook)
(8)
The handle
is comfortable when using the extension tube.
(9)
The flexible tube
Connects to the main housing of the steam
mop and is designed to make washing floors, windows, ceilings
and other hard-to-reach surfaces more convenient.
(10)
The two microfiber
pad
s
attach to the mop head and are used
to clean scratches and stains from hard surface floors.
Microfiber fabrics are reusable and machine washable.
NOTE :
Microfiber wipes are designed to absorb and collect dirt.
For best results, we recommend you vacuum the floor before
mopping.
(11)
The precision nozzle & flat brush
attach to the precision nozzle
and are designed to remove stubborn stains. You have a nylon
round brush for brushing (a carpet, for example) and a copper
round brush for brushing metal surfaces (the interior of an oven
and grill racks, for example).
NOTE :
The copper round brush can damage some delicate
surfaces, such as stainless metal. Make sure the copper round
brush can be used on the surface you want to clean. If you are
not sure if any surface can be damaged by this brush, we
recommend that you do a small area test first.
EN-8
