THOMSON SpeedTouch, Руководство по настройке

Страница: 53 / 110

Chapter 5
Routed PPPoE
E-DOC-CTC-20051017-0167 v1.0
45
The Ethernet interface
Proceed as follows to create, configure and attach/connect the Ethernet interface:
1
Add a new Ethernet interface.
2
Configure the new Ethernet interface with as destination the ATM interface
created above.
3
Connect the ETH interface.
The DHCP server
Proceed as follows to configure the DHCP server:
1
Add a new DHCP server pool.
2
Configure the DHCP server pool.
=> eth ifadd intf=RtPPPoE_eth
=>
=> eth ifconfig intf=RtPPPoE_eth dest=RtPPPoE_atm
=>
=> eth ifattach intf=RtPPPoE_eth
=>
=> dhcp server pool add name=spoof_pool
=>
=> dhcp server pool config name=spoof_pool intf=lan1 index=0
unnumbered=enabled
=>
It is important to give this pool priority over the default address pool by
setting index=0. When the spoofing pool does not have an address, local
PCs will be served by the next pool (default pool).