EN
20
Chapter 5
Other information
Sockets
AV1 and AV2 SCART sockets (input-output) at the back
These sockets can be used to connect a range of equipment, including video recorders,
camcorders (VHS, S-VHS, 8 mm or Hi 8), decoders, satellite receivers, DVD players, games
consoles or devices producing an RGB signal.
AV3 SCART socket (input) at the back
This socket can be used to connect equipment, such as video recorders or camcorders
(VHS, S-VHS, 8 mm or Hi 8).
RCA audio and video component (synchroscan) sockets
(input) at the back
These can be used to connect a DVD player.The component sockets automatically detect
the type of component signal received: interlaced component (Y/Pr/Pb) or progressive
component (Y/Cr/Cb).The supported formats are 480i, 480p, 576i, 576p, 720p, and 1080p.
HDMI socket (input) at the back
This can be used to connect a PC with a compatible graphics card, certain DVD players or
a compatible high-definition digital satellite decoder.This socket allows a very high
transmission quality for the audio and video signals.To connect a device with a DVI socket,
you can use the HDMI socket and the RCA audio sockets. In this instance, the HDMI
socket is used for receiving the video signal and the RCA sockets for receiving the audio
signal. An HDMI-DVI cable is required.
This socket supports many picture formats including HDTV (720p, 1080i, and 1080p) and
PC sources (up to SXGA resolution).
Notes:
- Do not connect a device supplying analogue RGB signals to this socket.
- The HDMI socket is compatible with HDCP format.
RCA audio + VGA sockets (input) at the back
These can be used to connect a computer.This socket supports many PC video formats, up
to SXGA resolution.
Audio RCA sockets (output) at the back
These can be used to connect a stereo amplifier, a hi-fi system or amplified speakers (see
below).
AV3 audio and video RCA sockets (input) at the front or
side
These can be mainly used to connect camcorders (VHS or 8 mm format).
S socket and AV3 audio RCA sockets (input) at the front
or side
These can be mainly used to connect camcorders (S-VHS or Hi 8 format).
To display images using the equipment connected, press the
AV
button on the remote
control: once to select AV1, twice to select AV2 and three times to select AV3. For some
equipment (connected to the SCART sockets), this selection is done automatically.
AV3
AV2
AV1
R
L
Y
Pb
Pr
HDMI
L.
R.
AUDIO
VIDEO
S
R
L
SUB-WFR
itc251-en 2/02/06 11:42 Page 20