Getting started
EN
4
Remote control
Most of your television’s functions are available via the menus that appear on the screen.The remote control supplied with your set can
be used to navigate through the menus and to configure all the general settings.The remote control and its functions may vary depending
on the television model.The rest of this page contains the description of the most comprehensive remote control. Optional remote
control features are indicated by the symbol
.
Standby / quit standby.
TV
To access TV mode. Press this button to control the
television.
VCR
To access VCR mode.
DVD
To access DVD mode.
SAT
To access SAT mode.
AUX
To access AUX mode.
AMP
To access AMP mode.
light
To provide information:
- it lights up when you press a button,
- it indicates the status when the remote control is
being programmed (see page 5),
- if the batteries are run down, it flashes when you
press a button.
PIP
To enable the PIP function.
SWAP
To swap the main picture with the PIP picture.
PIP+/PIP-
To change programmes within the PIP function.
ZOOM
To change the size of the PIP picture.
FREEZE
To freeze the main picture.
SLEEP
(Disabled).
LIGHT
Remote control light.
PRESETS
(red button) sound and picture settings menu
LIST
(green button) list of programmes
INFO
(yellow button) status information
GUIDE
(blue button) programme guide
TEXT
(purple button) Teletext
The coloured buttons can also be used for operating Teletext.
To select menu options.
To set functions, change values, enable and disable
functions (checkbox) in menus.
To select the picture format or zoom.
OK
To confirm a selection, enable and disable functions
(checkbox) in menus.
MENU
To access the OVERVIEW menu.
EXIT
To exit the menu structure.
In PIP mode: to disable the PIP function.
+/-
To control the volume.
To switch the sound off and back on again.
RETURN
To return to the previous channel/AV programme.
PR+/PR-
To change channels.
0-9
To select a channel by its number. In the case of
channel numbers with two digits, press
0
to display “
-
-
”, then enter the channel number.
AV
To select an appliance connected to an AV socket.
DEMO
To access demo mode.
Using the remote control for other equipment
The remote control supplied with your television may vary depending on the model you have chosen. Some remote controls can be used
to control other appliances using the programmable buttons
VCR
,
DVD
,
SAT
,
AMP
and
AUX
.
For each button you can control the following appliances:
VCR
: video recorder
DVD
: DVD player
SAT
: satellite receiver, cable network
AMP
: hi-fi system, Home Cinema amplifier
AUX
: decoder for terrestrial digital TV set and any other appliance. For instance, if you have two video recorders, you can program the
VCR
button to control one video recorder, and program the
AUX
button to control the other one.
Note: The
TV
button is not programmable.
Programming the remote control
Automatic code search
This method can be used to automatically find the most appropriate code for your appliance.
1.
Switch on the appliance you wish to use the remote control with.
2.
Press the relevant button for this appliance on the remote control, and while holding this button down, press the
standby button
until the light or the appliance buttons of the remote control come on. Release both buttons.
3.
Point the remote control at the appliance and press
PLAY
.Wait until the light stops flashing. If the appliance has not gone into standby
mode, press the
PLAY
button again to continue the search for the next set of codes. Repeat this operation until the appliance goes
into standby mode.There are around 20 sets of codes.
4.
When the appliance goes into standby mode, switch it on again without using the remote control. Press the
REV
button as many
times as is required to return the appliance to standby mode.
5.
Press the
STOP
button and hold it down until the light or the appliance buttons of the remote control go off.
Note:You can cancel the programming operation at any time by pressing the
EXIT
button.
itc251-en 2/02/06 11:42 Page 4
