5
Getting started
EN
Manual programming
This method involves carrying out a manual search for the codes to
be used for controlling your other appliances.
1.
Switch on the appliance you wish to use the remote control
with.
2.
Press the relevant button for this appliance on the remote
control, and while holding this button down, enter one of the
codes relevant to your make of appliance (there is a list of codes
at the end of this manual). If the appliance buttons of the remote
control fl ash you have entered the wrong code or it is not
possible to program the remote control.
3.
Point the remote control at the appliance and press the
relevant button (
VCR
,
DVD
, etc). Press the
standby button.
If the appliance does not go into standby mode, try another
code.
Depending on the year of manufacture and the type of appliance,
some functions may not be available. Certain codes may cover
more functions than others. Test the functions you can control and,
if appropriate, try other codes. Note here the code(s) which work
best.
VCR
AUX
DVD
AMP
SAT
When you change the remote control’s batteries, remember
to reprogram it.
Programming the volume control function
If you have programmed the TV remote control to use with other
appliances and these are connected to an amplifi er you can also
programme the remote control to adjust the volume when you
are using one of these appliances. The example below describes the
procedure for programming a DVD player.
1.
Programme
the
AMP
button on the remote control to use
with the amplifi er (refer to page 4).
2.
Move the remote control away from the appliances. Press the
-
button and while holding it down, press the relevant mode
button (
DVD
, in this example), then the
AMP
button. Release
the
-
button.
3.
Switch on the amplifi er, then the DVD player.
4.
Set the remote control to
DVD
, play a disc and adjust the
volume using the
+/-
buttons.
Repeat this operation for the other appliances.
To cancel the programmed function for any of the appliances, press
the
-
button, while holding it down and enter the code 000
using the numeric buttons.
Video recorder
DVD player
Satellite receiver
Hi-fi system
Press
the
VCR
button.
Press the
DVD
button.
Press the
SAT
button.
Press the
AMP
button.
On/Standby On/Standby
On/Standby On/Standby
MENU
To display the main menu
To display the main menu
To display the main menu
Vertical scrolling in menus
Vertical scrolling in menus
Vertical scrolling in menus
Horizontal scrolling in menus
Horizontal scrolling in menus
Horizontal scrolling in menus
OK
To confi rm an action
To confi rm an action
To confi rm an action
EXIT
To close a menu
To close a menu
To close a menu
0-9
To directly access channels
To enter numeric values
To directly access channels
To select a station using
or enter numeric values
or select options in menus
or enter numeric values
its number
PR+/PR-
To change channels
To change chapters
To change channels
To change stations
AV
To select AV input
To select AV input
REV
Rewind
Rewind
PLAY
Play
Play
FWD
Fast forward
Fast forward
STOP
Stop
Stop
PAUSE
Pause picture
Pause picture
REC
Record
MUTE
To switch the sound off and
back
on
again
+/-
To set the volume level
Important:
If the batteries in your remote control are run down you can use the buttons on
the front of your TV set as they have the same functions as the corresponding
buttons on the remote control.
130-EN-DVBT.indd 5
130-EN-DVBT.indd 5
26/01/06 14:19:05
26/01/06 14:19:05
Содержание Intuiva
Страница 2: ......
