3
Getting started
EN
Switching on
Follow the instructions on this page on how to switch on your TV set and the remote
control before going on to following pages describing how to use the remote control and
the channel set-up procedure.
1.
Insert two LR06 or AA batteries in the remote control.
Precautions on using batteries:
- Only use the battery types specifi ed.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
- Do not expose batteries to excessive heat, throw them in a fi re, recharge them or try to open
them, as this could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using it for a long period of time
(several weeks).
2.
Connect the power cable
FIRST
to the television,
THEN
to a mains socket.
Your TV set should only be connected to a 220 - 240 V ~ 50/60 Hz AC supply.
It must not be connected to a DC supply. If the plug is detached from the cable, do not,
under any circumstances, connect it to a mains socket, as there is a risk of electric shock.
Equipment for the UK and Ireland is supplied with a mains cable fi tted with a moulded
plug.
This plug contains safety components and must not be replaced by one sold by general
retailers. It is fi tted with a fuse that protects your television. If your set has stopped
working, the fuse may have blown. If it has, replace it with an identical ASTA or BSI
certifi ed (BS1362) 5-amp fuse.
3.
Connect the outside aerial or cable network to the
DIGITAL RF in
socket at the
back of the TV set.
The aerial socket (
DIGITAL RF in
) can be used for connecting an external aerial or
other equipment fi tted with a modulator (video recorder, satellite receiver, etc.).
If you want to access analogue channels, connect the
RF out
and
RF in
sockets using
an aerial cable.
We recommend that you do not connect other equipment (video recorder, satellite
receiver, etc.) to your TV set to begin with, so as not to complicate the set-up procedure
with the additional steps involved. Connect them when you have fi nished setting up the
channels by referring to page 26 of this manual.
4.
Switch the TV on by pressing the
button located on the side.
Note: The fi rst time you switch on the television, the language selection menu appears.
You will fi nd a description of how to use the remote control on page 4. Then go to page 6
for information on the initial set-up of channels.
Note: Before connecting other devices to the AV sockets, carry out the initial channel set-up
(described on page 6) in order to avoid any problems with equipment selection.
220 - 240 V ~ 50/60 Hz
Mains socket in
continental Europe
5A
Please respect the environment and the relevant regulations. Before you dispose
of batteries (or accumulators), ask your dealer whether they require special
recycling and if he is able to take them back.
130-EN-DVBT.indd 3
130-EN-DVBT.indd 3
26/01/06 14:19:04
26/01/06 14:19:04
Содержание Intuiva
Страница 2: ......
